33mm LED Point Light Source

33mm LED Point Light Source

33mm led point light source for landscape lighting,facade lighting,building lighting Apply aluminum alloy shell and PC flame retardant plastic, high strength, impact resistance, anti-aging, easy installation. Support the DMX512 control, manual and automatic address selections, meet the needs of customers different occasions, long distance signal transmission, strong anti-jamming capability.
Chat Now

Product Details

led pixel light features:

These dmx pixels can be installed on the facade of shopping center, bank, and bridge and so on.

High-brightness SMD RGB LED are assembled in this pixel.

DMX address can be set automatically and memorized also.

Easy installation with all pixels in serial connection.

The communication between pixels are synchronized perfectly under support of Ledcolourlight Artnet Controller

Standard DMX512 control protocol.

Save 40% power with more efficient DC to DC power management design. Wide working voltage range: DC16V-DC24V.

33mm led point light source  (3)

Hot Tags: 33mm LED point light source, China, suppliers, manufacturers, wholesalers, retailer, contractor, engineering, customized, price, cost, company, for sale
Power Test: Input Voltage 24V, Ta=25℃±5℃ , 30min .
Temperature Test : Input Voltage:25V 30min .
Drop Test : Free fall at 1.2m height , 10 Cycles .
Thermal Shock : -40℃(30min) ~ 100℃ (30min) , 200 Cycles .
Salt Spray Test : Salt 5% , 72H .
UV Test : UV-A, 350-400nm, 60℃ , 72H .
Switching Cycle Test : ON 25 second / OFF 5 second , 5000 cycle .
Puncture Test : DC 500V , Once .
ESD Test : 3000V , Once .
Temperature test : -30℃~65℃,RH 85% , 72H .
Tensile test : 20KG , Once .
Vibration test : Horizontal and vertical direction , 4H .
IP Rating : IP68 0.5m underwater , 48H .
Flame Retardance : UL94-V0 , 10 Cycle.
Installation way (flexible way suitable for anyway your project demand):
1)Install by Aluminum
2)Install by steel wire and plastic snap joint
3)Through hole install the led light
4)Fix the led light by 3M glue on the back of it
5)Use the bracket and screw to fix the led light on the facade or building


You Might Also Like