• IP65, easy for outdoor installation.
• 360 degrees viewable with the uniform luminance.
• RGB Full Colour.
• Low power consumption and heat.
• Easy to be connected and controlled with led decoder and DMX512 Controller.
• The ball is strong and anti-wrestling.
• The length can be customized. Easy to be cut and connected.
• The constant current led driver makes sure the stability and long life of the DMX ball.
Item Name: WS2811 6LEDs module Working Voltage: DC12V Led QTY: 6leds/PCS Led Type: SMD5050 RGB IC Type: WS2811 IC Diameter: 50mm, 20PCS a String
working with Arduino, PIC, and ARM microcontrollers Power Consumption: Max 1.44W Greyscale: 256 Gray-scale Emitting Color: RGB/W/R/G/B/other single color Waterproof IP grade:IP67/ non-waterproof Connection: 1) Signal wire: DC+,CLK, GND 2) DC+ and GND connect to power supplier; DAT and GND connect to controller 3) Relative Controller: SPI controller support ws2811; when use DMX decorder, can connect to DMX system 4) Support online control 5) Each pixel can be controlled individually 6) Can show any color 7) Can be used as flexible led display screen to show image and video
Installation Notice: 1) Make sure the connection is correct according to the diagram 2) Pay attention to the parameters limit of voltage. DO NOT run over the peak value
Next : WS2812B 5050 RGB LED Chip
Previous : SK6812 5050 RGB LED Chip
Hot Tags: ws2811 6LEDs module, China, suppliers, manufacturers, wholesalers, retailer, contractor, engineering, customized, price, cost, company, for sale
Power Test: Input Voltage 24V, Ta=25℃±5℃ , 30min .
Temperature Test : Input Voltage:25V 30min .
Drop Test : Free fall at 1.2m height , 10 Cycles .
Thermal Shock : -40℃(30min) ~ 100℃ (30min) , 200 Cycles .
Salt Spray Test : Salt 5% , 72H .
UV Test : UV-A, 350-400nm, 60℃ , 72H .
Switching Cycle Test : ON 25 second / OFF 5 second , 5000 cycle .
Puncture Test : DC 500V , Once .
ESD Test : 3000V , Once .
Temperature test : -30℃~65℃，RH 85% , 72H .
Tensile test : 20KG , Once .
Vibration test : Horizontal and vertical direction , 4H .
IP Rating : IP68 0.5m underwater , 48H .
Flame Retardance : UL94-V0 , 10 Cycle. Installation way (flexible way suitable for anyway your project demand):
1)Install by Aluminum
2)Install by steel wire and plastic snap joint
3)Through hole install the led light
4)Fix the led light by 3M glue on the back of it
5)Use the bracket and screw to fix the led light on the facade or building