Waterproof led wall washer light
Led wall washer controller adopts high-quality aluminum material and surface paint treatment process, which has good heat dissipation effect and good sealing performance. It effectively prevents dust and rain from entering the controller. The controller can flexibly change the speed and mode of the lamp according to the button.
|Application||architechtural lighting led wall washer|
1. First, solder the LED lamp beads to the aluminum substrate with a soldering iron and tin bars;
2. Then test the welded board to see if there is any solder joint or no light;
3. After the test is finished, put the heat-dissipating silicone on the back of the aluminum substrate and put the board into the outer casing;
4. The preparation process is completed, the power is soldered to the positive and negative stages of the aluminum substrate, and then taped and glued;
5. The glue wall washer must be evenly leveled and cannot be tilted;
6. Remove the tape on the next day or the afternoon of the glue, glue the glass, and install the plugs at the wall washer;
7. After the wall washer is installed, it is wired. The outlet interface is male and female for easy installation.
8. The finished product is finished and can be used.
The LED wall washer is controlled by the built-in microchip. In small engineering applications, it can be used without a controller. It can realize dynamic effects such as gradation, jump, color, flicker, random flicker, gradual change, etc. It can also be controlled by DMX. , to achieve chase, scan and other effects. The main application fields are: single building, historical building exterior wall lighting; building exterior light, indoor partial lighting, green landscape lighting, billboard lighting; medical, cultural and other special facilities lighting, dance halls and other entertainment venues atmosphere lighting, etc. .